IPG propose un large choix de rubans en polyester, polyimide, tissu de verre et autres qui fonctionnent parfaitement dans ces applications. Si vous travaillez autour de composants sensibles à la statique, nous avons une solution antistatique ou faible statique pour vous.
Filtrer par
Produits
Page 2 sur 3
-
6130
Specialty Polyester Plater's Tape
Polyester (PET) film backing with a silicone adhesive provides flexibility, solvent resistance, puncture resistance, high chemical resistance, and excellent long term aging characteristics. Provides secure seal without leakage. Removes cleanly.
Voir le produit -
6215
Polyester High Temperature Masking Tape
Polyester (PET) film backing with a silicone adhesive. Designed to perform in difficult masking operations such a various phases of printed circuit board (PCB) production or masking of surfaces during application of durable powder coatings. PET backing provides flexibility/conformability, solvent resistance, and chemical resistance. Removes without leaving residue on surfaces....
Voir le produit -
BD23
Crepe Paper Tape
A medium strength, smooth crepe paper, pressure-sensitive tape having excellent tear strength and conformability to irregular surfaces. BD23's stain free adhesive is formulated to provide resistance to elevated temperatures (up to 300°F). Time of exposure and temperatures will vary depending on surfaces and application conditions.
Voir le produit -
FM28
High Temperature Masking Tape
A pressure-sensitive masking tape designed for use in extreme high temperature conditions. The polyimide backing combined with backing combined with thermosetting silicone adhesive provides superior flame and chemical resistance. Can withstand exposure to temperatures up to and in excess of 400°F (204°C).
Voir le produit -
FM38
Anti-Static Polyimide Film Tape
Polyimide backing and silicone adhesive with Anti-Static Polymer Coating. This tape is used where low static, toughness, puncture resistance, extreme resistance to heat, and flame retardant properties are required. This product generates less than 50 volts discharge as it is being dispensed.
Voir le produit -
HB296
Black Double-Coated PET Film Tape
Cactus® 0.5 mil polyester (PET) film coated on both sides with pressure-sensitive acrylic adhesive. Provides exceptional opacity and shear strength, moderate adhesion, excellent temperature resistance and good initial tack allowing immediate/permanent bond to a variety of surfaces (including irregular and porous surfaces). Resistant to chemicals and UV. Highly recommended for...
Voir le produit -
N2208
Double-Coated Foam Tape
Cross-linked high density polyethylene, closed cell foam coated on both sides (double-coated) with a permanent bonding acrylic pressure-sensitive adhesive protected by an easy release treated 60# glassine paper liner (white). Adhesion allows permanent bond to a variety of irregular surfaces.
Voir le produit -
N2215
Double-Coated Foam Tape
Cross-linked high density polyethylene, closed cell foam coated on both sides with a permanent bonding acrylic pressure-sensitive adhesive protected by an easy release treated 60# glassine paper liner (white). Adhesion allows permanent bond to a variety of irregular and contour surfaces.
Voir le produit -
P248E
Double-Coated Tissue Differential Adhesion Tape
Cactus® P248E Double-Coated Tissue Tape with Differential Adhesion – Black colored tissue coated on both sides with a solvent-based, pressure-sensitive acrylic adhesive for good initial tack and light proof bonding. One side (exposed) ‘open’ side provides moderately higher adhesion versus the ‘closed’ (liner) side.
Voir le produit -
P2960
Double-Coated PET Film Tape
Film de polyester (PET) de 1,0 mil enduit sur les deux faces d'un adhésif acrylique important à la pression. Offre une bonne adhérence initiale permettant une adhérence immédiate/permanente à une variété de surfaces (y compris les surfaces irrégulières, LSE (telles que PE, PU ou PP) et poreuses. Comprend une doublure PCK de 6 mil à dégagement facile 80# (blanc).
Voir le produit -
P2970
Double-Coated PET Film Tape
Film de polyester (PET) de 0,5 mil enduit sur les deux faces d'un adhésif acrylique important à la pression ayant un pH de 7,0 (neutre). Offre une bonne adhérence initiale permettant une adhérence immédiate/permanente sur une variété de surfaces (y compris les surfaces irrégulières et poreuses). Comprend une doublure PCK 74 # à dégagement facile de 4,7 mil (blanc).
Voir le produit -
Y291M
Voir le produit